Precipitant and chemicals station

Level measurement and point level detection in the chemical tank

Application

The addition of chemicals is used at many stages of treatment, for example, phosphates in the wastewater are precipitated out in primary sedimentation, in aeration systems or in special precipitation and secondary clarifiers. Precipitants like ferric chloride bind the phosphate chemically and deposit it in the sludge.

Recommended Products

VEGAPULS 61

Continuous level measurement data for permanent inventory control and optimal dosage

Operationally reliable, maintenance-free measurement
Chemically resistant, plastic-encapsulated instrument version
High accuracy independent of outgassing and temperature fluctuations

Measuring range - Distance

35 m

Process temperature

-40 ... 80 °C

Process pressure

-1 ... 3 bar

VEGASWING 63

Back up point level detection system to avoid overfilling the tank with media hazardous to water

High chemical resistance through use of application-oriented materials
Universally applicable
Adjustment and maintenance free operation

Process temperature

-50 ... 250 °C

Process pressure

-1 ... 64 bar

Version

Standard

Hygienic applications

with gas-tight leadthrough

with tube extension

with temperature adapter

VEGATOR 121

Single channel signal conditioning instrument for level detection

Comprehensive monitoring detects short-circuit and line break of the measuring cable and interferences in the sensor
Simple and comfortable SIL and WHG function test by means of test key
Simple installation through carrier rail mounting as well as detachable, coded terminals

Protection rating

IP 20

Input

1 x sensor input two-wire 8/16 mA

Output

1 x operating relay (SPDT)

Optionally 1 x fail safe relay output (SPDT)

View more about Level measurement and point level detection in the chemical tank on main site