Low flow Small size Ultrasonic Flow Meter (ALSONIC-MINI)
Specifications
Details
SmartMeasurement’s ALSONIC-MINI is a clamp-on transit time ultrasonic flowmeter designed for small pipe sizes and ultra-low flow rates. The unique design of the ALSONICMINI allows it to be installed directly onto the pipeline without the use of coupling gel or the need to manually adjust transducer spacing. The plug and play installation method makes use of a magnetic circular clamp to achieve & maintain contact in between the transducers and the pipe wall. Total installation time is less than three minutes, significantly reducing the amount of time needed to install a traditional clamp-on meter.
The ALSONIC-MINI is offered with individual fittings for pipe sizes ranging from ¼” through 3” (8~80 mm) and features an easy-to-read OLED display and industry standard outputs including 4-20 mA and modbus. The ALSONIC-MINI can accommodate a variety of pipe materials including stainless steel, carbon steel, copper, PVC, PVDF, polypropylene and HDPE. This combination of features make the ALSONIC-MINI an ideal choice for DI water, chemical injection, food & beverage and a variety of other applications where non-invasive low flow measurement is required.
- Plug & play transducers
- Clean liquids, small pipe sizes
- ½"-2" (15-50 mm) line sizes
- 32~+122 °F ( -0 ~ +50C)
- 2% of reading
- Indvidual size transducers, wrap-around installation
- Plug and play transducers, no gell needed
Features
-
Available in ¼” – 3″ (8-80 mm) pipe sizes
-
Will measure a wide range of fluid velocities; 0.3-16.5 f/s (0.1 ~5.0) m/s
-
Data logger includes daily, monthly and total
-
Outputs include 4-20mA, alarms and MODBUS RTU
-
Suitable pipe materials including stainless steel, carbon steel, copper, PVC, PVDF, polypropylene and HDPE.
-
Accuracy; ±2% of reading
-
Energy and BTU measurement optional
NIST traceable calibration certificate
Specifications
| Measuring Principle: | Transit time ultrasonic |
| Flow range: | 0.3 ~ 16.5 ft (0.1 m/s~5.0 m/s) |
| Accuracy: | ±2.0% reading |
| Protection: | IP54 |
| Pipe size: | ¼-3″ (8 ~80mm) |
| Data storage: | Daily, monthly and annual |
| Analog output: | 4~20mA, Maximum load: 600Ω |
| Communication: | RS485, Supports modbus communication protocol |
| Alarm output: | OCT, Upper and lower limit alarm function (optional) |
| Power supply: | 24VDC |
| Case material: | Aluminum alloy |
| Cable length: | 6′ (1.8m) |
| Screen: | 128*64 OLED 64 display screen |
| Units: | Metric and imperial units are available, Cubic Meters (m3), Liters (L), USA Gallons (GAL)/hour, /min; default unit setting: m3/hr |
| Totalizer: | Six-bit digit |
| Pipe materials: | Stainless steel pipe, carbon steel pipe, copper pipe, plastic pipe |
| Ambient temperature: | (32°F~122°F) 0°C~50°C |
| Media temp: | (32°F~122°F) 0°C~50°C |
| Environment Humidity: | pulse, 4-20mA, RS485, Modbus, M-Bus, GPRS |
Refer here for more details: https://www.smartmeasurement.com/small-size-low-flow-ultrasonic-flowmeter/
View more about Low flow Small size Ultrasonic Flow Meter (ALSONIC-MINI) on main site